Fourload

Plan Snapmaker U1 print jobs that fit four toolheads. Drop a 3MF or build a plate, preview it on the official 270 mm bed, and split the work when a plate needs more than four colours. Every machine limit is cited from official Snapmaker pages. This is a planner, not a slicer, and it has not been run on a physical U1.

Plate

Game board
180 × 180 × 4 mm · PLA · auto packed
Red pawn
20 × 20 × 32 mm · PLA · auto packed
Blue pawn
20 × 20 × 32 mm · PLA · auto packed
Yellow pawn
20 × 20 × 32 mm · PLA · auto packed
White token
24 × 24 × 3 mm · PLA · auto packed
Black token
24 × 24 × 3 mm · PLA · auto packed

Optional settings

Leave a field blank if you do not want a check. Layout gap is a planner spacing, not an official clearance.

Bed preview · 270 × 270 × 270 mm official volume

Origin at the front left, units in mmJob 1 of 2 · 4 of 4 toolheads · fits the official volume
Game boardRed pawnBlue pawnYellow pawn0270 X270 Y
Game board · 4 mm tallRed pawn · 32 mm tallBlue pawn · 32 mm tallYellow pawn · 32 mm tall

Loadout

SlotColour
T0Green #2E7D32
T1Red #C62828
T2Blue #1565C0
T3Yellow #F9A825

Notes

infoThis plate was split into 2 U1 jobs so that each job uses at most 4 toolhead colours. Print the jobs as separate plates. Fourload does not claim the printer can change spools mid-print.

Official sources

Official Snapmaker U1 specifications: four toolheads, 270 mm build volume, 0.4 mm nozzle, 1.75 mm filament, 300°C nozzle max, 100°C bed max, 500 mm/s, 20,000 mm/s², 32 mm³/s max flow, and the published material lists.

Official U1 FAQ summary on the Snapmaker Forum: usable bed 270 mm × 270 mm, and four 0.4 mm stainless hotends plus a spare.

Official Snapmaker U1 product page: The official product page says four independent, preheated toolheads let U1 switch colors and materials in just 5 seconds. Footnote [1] on that page says: "This is a typical result from Snapmaker Lab tests and is for reference only." Fourload does not treat this figure as a measured job time.